Hardware and edge
The right equipment for your line, not a generic camera.
We select, configure and install cameras, on-site computing, network and power for what your process needs to measure. Hardware and software are designed together, as one system.
The station, part by part
A counting station is more than a camera: lens, protection, lighting, sensors, computing, network and power have to work together, shift after shift. Pick a part.
Camera and lens
- What it does
- Captures the belt with the resolution and speed the piece needs. The lens sets how much width it covers and from how far.
- What drives the choice
- belt speed · piece size · mounting height · width to cover
Selection depends on the line
The same need —counting pieces— leads to different equipment depending on the place. That's why we assess before recommending.
Wide or narrow belt
Lens, mounting height and sometimes the number of cameras change.
Cold and washdown, or dry
Housing, connectors and mounting change.
Shiny or matte product
The type of light and its angle change.
From the plant's need to working equipment
- 01
Requirement
What to measure, where, at what speed and in what environment.
→ requirements sheet
- 02
Selection
Equipment chosen for that requirement, with alternatives.
→ equipment list
- 03
Sourcing
Purchasing and delivery coordinated across manufacturers.
→ purchasing plan
- 04
Installation plan
Location, mounting, cabling, power and network, with maintenance.
→ mounting drawing
- 05
Configuration
Equipment is configured and tested before it reaches the line.
→ base configuration
- 06
Integration
Each camera knows which line, order and lot it measures.
→ signal map
- 07
Testing
We validate on your line before relying on the data.
→ test record
- 08
Support
Remote and on-site support, recalibration, and help with the manufacturer's warranty.
→ support plan
Already have cameras or equipment? We assess whether they can be reused before recommending anything new. See how we work →
What each part includes, commercially
So they don't get mixed up: equipment, installation, software and support are different things and are quoted separately in every proposal.
- Equipment
- Quoted per project for the designed configuration. The equipment stays in your plant. You can acquire it through us or, when compatible, use your own.
- Installation and commissioning
- Mounting, cabling, configuration and testing, coordinated with production and maintenance; when possible, during planned stops or off-shift.
- Software
- A usage licence for the Autech platform, configured with your lines, products and procedures.
- Technical support
- Remote and on-site support as agreed, recalibration when product or line changes, and training for the people who use the system.
Let's assess your line before talking equipment.
Tell us what's costing you most today. We review it with you, show how we'd solve it and estimate its value together.